Chisel blades are the most effective choice to clear brambles. There are several things to consider when choosing a chisel blade for brambles, such as types of teeth, size, number of teeth, arbor, speed.
Here are my top picks for the best brush cutter blade for brambles:
Here are the best brush cutter blades for brambles you can buy in 2025:
- Best Overall (Steel Brush Blade): Forester Chainsaw 9 Inch
- Best For Smooth Cuts (Carbide Brush Blade): BlueCatELE 8 Inch 80T
- Most Durable (Carbide Brush Blade): Joalxy 10 Inch 80T & 40T
- Ultra-High RPM (Carbide Brush Blade): Renegade Blade 8 Inch 80T
- Best For Serious Projects (Carbide Brush Blade): Renegade Blade 9 Inch 68T
- Best For Clean Cuts (Carbide Brush Blade): Renegade Blade 8 Inch 20T
6 Best Brush Cutter Blades For Brambles | ||
---|---|---|
Best Overall | Forester Chainsaw 9 Inch
| |
Best For Smooth Cuts | BlueCatELE 8 Inch 80T
| |
Most Durable | Joalxy 10 Inch 80T & 40T
| |
Ultra-High RPM | Renegade Blade 8 Inch 80T
| |
Best For Serious Projects | Renegade Blade 9 Inch 68T
| |
Best For Clean Cuts | Renegade Blade 8 Inch 20T
|
Steel Brush Blade
Best Overall (Steel Brush Blade): Forester Chainsaw 9 Inch
- Steel chainsaw teeth
- Fits on most straight shaft brush cutters
- Operate at speeds up to 10,000 RPM
- Durable & easy to sharpen
- Effective and Dangerous
Forester Chainsaw 9 Inch features 20 chainsaw teeth segments riveted to a 9-inch disc. All are made of steel. This is a signature blade design of Forester, which gives you a significant advantage of effective and wide cuts; moreover, this blade type helps reduce the change of blade binding.
Steel blades are more flexible than carbide blades; they are also more durable, less risk of being cracked/broken, and can be easily sharpened. Moreover, steel can deal with impact and heat better than carbide. So steel blades are preferred when it comes to soft stuff like trimming brambles.
Forester Chainsaw 9 Inch has a 1-inch arbor, it’ll fit most straight shaft brush cutters. It’s pretty easy to install as well. Steel blades are normally not designed for operating at a very high speed. However, this blade is made to operate at speeds up to 10,000 RPM.
This brush blade is pretty effective, however, pretty dangerous as well. Remember to wear leg and eye protection to prevent damage from kickbacks.
Forester Chainsaw 9 Inch Specifications | |
---|---|
Size | 9 inches |
No of Teeth | 20 teeth |
Speed | 10,000 RPM |
Highlight Features | 1-in arbor; chainsaw teeth |
Forester Chainsaw 9 Inch offers you a significant advantage of effective and wide cuts.
Carbide Brush Blade
Best For Smooth Cuts (Carbide Brush Blade): BlueCatELE 8 Inch 80T
- Tungsten Carbide Teeth
- More teeth for smoother cuts
- Universal fit most brush cutter
- Longer lifetime
- Blunt quickly
To cut harder stuff like branches, you’ll need a carbide blade. I recommend BlueCatELE 8 Inch 80T for smooth cuts. The blade features tungsten carbide teeth. Carbide is the hardest alloy used for cutting blade. While circular blades are not so good for mulching, they are perfect for horizontal cuts and trimming.
More teeth mean a longer lifetime and smoother cuts. The blade is pretty thick and durable. Also, it features a universal arbor that fits most brush cutters. This is a blade for home use at a reasonable price. It becomes blunt quickly when being used to cut hardwoods frequently, so does not suit commercial purposes.
BlueCatELE 8 Inch 80T Specifications | |
---|---|
Size | 8 inches |
No of Teeth | 80 teeth |
Speed | |
Highlight Features | 1-in arbor; Tungsten teeth |
BlueCatELE 8 Inch 80T offers smoother cuts with 80 tungsten carbide teeth.
Most Durable (Carbide Brush Blade): Joalxy 10 Inch 80T & 40T
- Dual blades for versatile uses
- Manga-steel & Cardibe alloys
- Well built, sturdy
- For leveling grass as well as cutting brambles
- One year warranty
- Blunt quickly
This Joalxy 10 Inch comes in a package of two. One has 80 tungsten carbide teeth, which is for leveling grass or cutting brambles. The other blade has 40 longer manga-steel teeth, which is for cutting brush, grass, brambles, shrub, and saplings. The 40T blade cuts faster and more effectively, while the 80T blade cuts more smoothly. You can change the blade to fit your needs.
10-inch blades spin slower than 9-inch or 8-inch blades; in return, they cut faster. If you don’t intend to cut hard branches, this may be a better choice than the BlueCatELE 8 Inch 80T.
The bodies of both blades are made of mange-steel alloys, which is sturdy and flexible. Overall, these blades are well built, pretty sturdy. Moreover, you can buy this pack confidently as it is backed by a one year warranty.
Like the BlueCatELE 8 Inch 80T, this Joalxy 10 Inch is aimed at home use. It may blunt quickly. If you want a serious blade for commercial purposes, you may consider the Renegade Blades below.
Joalxy 10 Inch 80T & 40T Specifications | |
---|---|
Size | 10 inches |
No of Teeth | 80 teeth & 40 teeth |
Speed | |
Highlight Features | 1-in arbor; Two blades for different needs |
Joalxy 10 Inch blades are pretty well-built and sturdy, two blades for versatile cuts.
Ultra-High RPM (Carbide Brush Blade): Renegade Blade 8 Inch 80T
- Tungsten Carbide Teeth
- Ultra high RPM
- Universal Fit
- Well-built for effortless cuts
- Sturdy and durable
- May not fit some trimmers
This Renegade Blade 8 Inch 80T cuts like a hot knife through butter. This is an 8-inch blade with 80 tungsten carbide teeth like the BlueCatELE 8 Inch 80T above. However, I rate this blade a bit better. It is pretty well built that offers you effortless cuts through brambles and small branches.
Renegade Blade 8 Inch 80T is designed for ultra-high RPM, above 10,000 RPM. It comes in two arbor sizes, 25.4 mm (1 inch) or 20 mm to fit various tools. However, still, the blade may not fit some trimmers.
Renegade Blade 8 Inch 80T Specifications | |
---|---|
Size | 8 inches |
No of Teeth | 80 teeth |
Speed | 10,000+ RPM |
Highlight Features | 25.4 mm (1 inch) or 20 mm arbor; Tungsten teeth; Pack of two |
Renegade Blade 8 Inch 80T cuts brambles like a hot knife through butter.
Best For Serious Projects (Carbide Brush Blade): Renegade Blade 9 Inch 68T
- Red RAZOR Hybrid combination blade
- Aggressive Cutting
- Very durable
- Ultra-high RPM
- Tooth pattern is hard to sharpen
Renegade Blade 9 Inch 68T is my pick for serious projects. This red blade is designed for aggressive cutting. The tooth pattern can crush brushes or trim branches easily. Moreover, this Renegade Blade operates at 10,000+ RPM. This a choice for serious projects.
Besides, this red RAZOR Hybrid combination blade is pretty durable. This blade is pretty popular among gardeners and home owners. However, there is a small drawback that the tooth pattern is quite hard to sharpen.
Renegade Blade 9 Inch 68T Specifications | |
---|---|
Size | 9 inches |
No of Teeth | 68 teeth |
Speed | 10,000+ RPM |
Highlight Features | 25.4 mm (1 inch) or 20 mm arbor; Red RAZOR Hybrid combination blade |
Renegade Blade 9 Inch 68T is designed for aggressive cutting with special tooth pattern.
Best For Clean Cuts (Carbide Brush Blade): Renegade Blade 8 Inch 20T
- Blue Hawk hybrid balde
- Angled Cavity Design
- Reinforced backing support
- Pretty thick
- Universal Fit
- Not so durable
Renegade Blade 8 Inch 20T has a special tooth pattern. It is called Blue Hawk hybrid blade with teeth sharpened both vertically and horizontally. This design helps perform a dual-cut effect, which directs brush to lower back sharpened corner then up to cutting tooth for a maximized.
Besides, the backing support is reinforced and the overall blade is pretty thick, which handles thick brambles smoothly. The design of Renegade Blade 8 Inch 20T really gives you the cleanest cuts. Moreover, the blade has a universal-fit arbor, so you can easily use this blade with most of the cutters.
Renegade Blade 8 Inch 20T Specifications | |
---|---|
Size | 8 inches |
No of Teeth | 20 teeth |
Speed | 10,000+ RPM |
Highlight Features | 25.4 mm (1 inch) or 20 mm arbor; Blue Hawk hybrid balde; Angled Cavity Design; Reinforced backing support |
Renegade Blade 8 Inch 20T with Blue Hawk hybrid teeth delivers the cleanest cuts.
How To Choose The Best Brush Cutter Blade For Brambles?
There are several types of blades for cutting brambles, including Knife, Chisel, Smasher, and Mulching blades. Knife blades feature a sharpened knife edge, which is the most common type of blade for gardening. The biggest advantage of this blade type is that they clear soft brushes pretty quickly. Smasher blades have no sharpened edge; they smash through brushes thanks to their weight and speed. This blade type requires no maintenance as there is no edge; they are pretty effective when it comes to soft grasses and watery weeds. Mulching blades have curves and an increased cutting edge. This design lets the blade cut the materials in the deck several times, so turn the leaves and grass into smaller pieces.
Chisel blades have a round shape; sharpened teeth are attached around the disc. This is the most effective blade type for cutting hard branches. In this review, I only review chisel blades as they are the most effective and easiest-to-use choice for cutting brambles.
Here are several things to consider when choosing a chisel blade for brambles:
- Types of teeth: You have three options - steel, chainsaw, and carbide. Steel blades are more flexible, more durable, less risk of being cracked/broken, and can be easily sharpened. Moreover, steel can deal with impact and heat better than carbide. So steel blades are preferred when it comes to soft stuff. To cut harder stuff like branches, you’ll need a carbide blade.
The last type is chainsaw teeth, which is an actual chain saw blade attached to the disc. These teeth is made of steel. You’ll want this type of teeth when dealing with thick branches.
- Size: The smaller the blade is, the faster it moves. While a bigger blade gives you a wider clearing path.
- Number of teeth: Having more teeth means that the blade lasts longer. During the process of cutting and trimming, teeth will be knocked off, so a blade with fewer teeth needs to be replaced sooner.
- Speed: Some blades are designed to be used in a 10,000 RPM cutter. Some blades are not. So read the description clearly before installing the blade into your cutter.
- Arbor: Most blades have an arbor of 1-inch, which is a universal size. However, there are some cutters feature a small arbor (20mm). This is also a spec you need to take into account when choosing a blade.
Which Brands Make The Best Brush Cutter Blade For Brambles?
Forester Shop
Forester shop is an American manufacturer of arborist tools, bar and chain saws, trimmers and brush cutters, and blades. Besides, they also provide protection clothes for arborists. They are pretty well-known in the industry for offering high-quality replacement parts, especially blades. If you are interested in steel blades, Forester shop is a considerable brand.
Renegade Blade
Renegade Blade is a huge name in the industry. They specialize in making blades for trimming bushes, limbs, and brambles. They are famous for making very unique bales, such as Blue Hawk Hybrid Blade, Red Razor Hybrid Blade, besides other traditional blades. The biggest advantage of Renegade's blade is its compatibility with ultra-high RPM trimmers and cutters (10,000+ RPM). When you are in need of heavy-duty blades for brambles, Renegade Blade is the to-go brand.
FAQs
Will a brush cutter cut brambles?
Yes. Surely, a brush cutter cuts brambles like a hot knife through butter. The steel or carbide blades are tough enough for thick branches.
How do you cut brambles?
Using a brush cutter is the fastest and easiest way to cut brambles. Or you can use a hand clipper if the brush is small enough.
How do you fix a brush cutter blade?
Basically, you have to place the blade on top of the drive disc, then place the support cup on top, place the support flange on top. Finally, fasten the locking nut.
How thick can a brush cutter cut?
A good brush cutter can cut through tree trunks up to 4 inches.
How do you remove a blade from a grass cutter?
To remove the blade, turn the bolt that retains the blade counterclockwise. Remember to take a cloth to keep the blade stand still while turning the bolt.
Conclusion
A good blade can cut through brambles like a hot knife through butter. I hope this review can help you choose a suitable blade.